A quieter, cooler room,
built in, not bolted on.
Insulation layered behind your plaster ceiling or within a wall partition cuts down on heat gain and noise transfer between rooms — a detail many partition and ceiling contractors skip to save cost.
A top-floor room that doesn't fight the sun.
Insulation layered behind the ceiling cuts down on heat gain from the roof space, especially in top-floor units carrying direct sun exposure through the day — often the single biggest reason an aircon runs constantly.
- ✦Thermal insulation layersReduce heat transfer from roof spaces into the room below, especially valuable in top-floor units and homes under direct sun exposure.
- ✦Specified to your buildingWe recommend the insulation grade and thickness that fits your budget, property type and the specific problem you’re trying to solve.
- ✦Retrofit into existing ceilings & wallsInsulation can be added when a ceiling or partition is already being opened up for other work, not only in new installations.
A partition that actually blocks sound.
Standard partition board alone blocks relatively little noise — acoustic-grade insulation inside the cavity is the real fix for a shared wall that carries too much sound between a bedroom, office or music room.
- ✦Acoustic partition upgradesDenser insulation infill for partition walls in bedrooms, home offices and music rooms, cutting sound transfer between spaces.
- ✦Moisture-aware installationWhere humidity is a concern, we account for vapour movement in how insulation is installed, to avoid trapping moisture in the cavity.
- ✦Grade matched to the room’s purposeA home office needs less acoustic performance than a music room — we specify the grade to the actual use, not a single default.
When insulation is
worth the add-on.
Insulation is the most commonly skipped line item on a ceiling or partition quote — usually to the client's regret within the first hot season.
From assessment
to sealed cavity.
Insulation is typically installed alongside a ceiling or partition project, adding one to two days depending on area.
Site Assessment
We assess heat exposure or noise sources and recommend the insulation grade and thickness that actually addresses it.
Cavity Preparation
The ceiling or partition frame is prepared and any existing material cleared before insulation goes in.
Insulation Installation
Batts or rolls are fitted snugly into the cavity without gaps or compression, which is where insulation performance is most often lost.
Close-up & Sealing
The ceiling or partition is boarded and sealed, keeping the insulation layer performing as specified.
What actually goes
into the cavity.
Material and thickness are matched to whether the priority is heat, noise, or both.
Insulation upgrades,
near you.
Heat and noise problems vary by property type and area — we assess each site rather than applying a blanket recommendation.
Kuala Lumpur
High-rise condo units in KL often need acoustic insulation between bedroom partitions more than thermal upgrades, given shared-wall construction.
Selangor
Landed homes across Selangor with direct roof exposure are our most common thermal insulation requests.
Puchong
Puchong terrace homes frequently combine thermal ceiling insulation with acoustic partition upgrades during a full renovation.
Shah Alam
Shah Alam’s office and industrial units often need acoustic insulation between meeting rooms and open work areas.
Kepong
Older Kepong homes with ageing roof insulation (or none at all) see the most noticeable improvement from a ceiling insulation upgrade.
What affects
the cost.
Insulation is quoted as an add-on to a ceiling or partition project — these factors move that add-on cost most.
Insulation
questions, answered.
How much does ceiling or partition insulation cost?
Cost depends on the area being insulated, the grade and thickness chosen, and whether it’s installed alongside new work or retrofitted into an existing ceiling or wall. It’s quoted as an add-on to a ceiling or partition project after a site assessment.
How much difference does insulation realistically make?
For heat, insulated top-floor rooms typically feel noticeably cooler and put less load on the aircon; for noise, acoustic-grade partition insulation measurably cuts sound transfer between rooms, though it won’t make a shared wall fully soundproof.
Is the insulation material safe to have in a home?
Yes — mineral wool and fibreglass batts are standard, widely used building materials, installed fully enclosed within the sealed ceiling or wall cavity, not exposed to the living space.
Can insulation be added to a ceiling or wall I already have?
Yes, though it’s more cost-effective when done while the ceiling or partition cavity is already open for other work. Retrofitting into a finished, closed ceiling is possible but adds cost for opening and resealing it.
Does adding insulation extend the project timeline much?
Usually only one to two extra days on top of a ceiling or partition installation, since it’s fitted while the cavity is already accessible.
Do you install insulation upgrades in Puchong, Shah Alam and Kepong?
Yes — insulation is available as an add-on to any ceiling or partition project we take on across the Klang Valley, including Puchong, Shah Alam, Kepong, KL and Selangor.
5.0 from 17 Google reviews
Read them all on Google →“The workmanship was genuinely impressive. The team worked fast, but quality was never compromised. The finishing was neat, clean and precise, and even the skimming was very well done.”
“As an interior designer with high expectations, I am very satisfied with the quality of their work. … Their pricing is also reasonable and worth the quality provided.”
“For first-time renovators like us, he was very patient in giving useful advice and never simply asked us to spend more money. … The final result turned out amazing — the plaster ceiling design really elevated the overall feel of our home.”
“I did a portion of plastered ceiling at kitchen area, some box-up and cement board partition wall. All are done with great workmanship.”
Five more ways
we shape a room.
Plaster Ceiling Solutions
Custom flat, tray and box-up ceilings designed around your actual room, not a catalogue mould.
Partition Wall Installation
Dust-reducing partition board installation for homes and offices across the Klang Valley.
Lighting & Cable Concealment
Cove lighting, downlights and cable routes built into the ceiling from day one.
Ceiling Design
Feature ceilings and bulkheads that balance the look you want against real site constraints.
Project Aftercare
On-time handover and a direct line to the team who did the work, long after payment clears.
Let’s design your
fifth wall.
Tell us about your space. We’ll arrange a free site visit and quote anywhere across the Klang Valley.